DS Audio DS-W3 Equalizer
Compared to the DS-W2 equalizer, the thickness of the circuit board has been changed from 1.6 mm to 2.0 mm, and the thickness of the copper foil has been changed from 35µ to 70µ.Components are also optimized for third-generation cartridges. In addition, the DS-W3 equalizer has four different low-frequency outputs to choose from. The DS-W3 equalizer has both unbalanced and balanced outputs, so you can choose the output that best matches your system.
If you are interested in the DS-W3 Equalizer, please contact us HERE
Compared to the DS-W2 equalizer, the thickness of the circuit board has been changed from 1.6 mm to 2.0 mm, and the thickness of the copper foil has been changed from 35µ to 70µ.Components are also optimized for third-generation cartridges. In addition, the DS-W3 equalizer has four different low-frequency outputs to choose from. The DS-W3 equalizer has both unbalanced and balanced outputs, so you can choose the output that best matches your system.
If you are interested in the DS-W3 Equalizer, please contact us HERE
Compared to the DS-W2 equalizer, the thickness of the circuit board has been changed from 1.6 mm to 2.0 mm, and the thickness of the copper foil has been changed from 35µ to 70µ.Components are also optimized for third-generation cartridges. In addition, the DS-W3 equalizer has four different low-frequency outputs to choose from. The DS-W3 equalizer has both unbalanced and balanced outputs, so you can choose the output that best matches your system.
If you are interested in the DS-W3 Equalizer, please contact us HERE
Specifications
Output Voltage
500mV (1kHz)
Output Impedance
More than 120Ω
Preamp Input Impedance
More than 10kΩ
Input Terminal
RCA terminal
Output Terminal
RCA terminal x 2, XLR terminal x 2
Size
W45cm x H12cm x D435cm
Weight
13.5kg
